Hidden Desktop v1.1.189 Incl KeyMaker - DVT

Hidden Desktop v1.1.189 Incl KeyMaker - DVT

Everything on your computer leaves a trace: internet browsing, emails, recent files, chats, and on and on. Remembering all the places to erase those tracks is not the answer. Software can delete a few of those tracks, but not everything!

Free Multi-Mirror File Uploading Hosts

So you have some files to share, and want to give people the widest possible ways for them to download the file, but don’t want to spend the time uploading to each site? Here are a few sites that you upload once, and it spreads it to the different file hosting sites.
Here is the list of all the services I have found so far!

Sharebee (http://www.sharebee.com)

Account Registration: No

Upload Methods: Single Local

Free hosts supported: megaupload.com, zshare.net, badongo.com, rapidshare.com

Note: will maintain reuploading if the service’s link is accessed once in 30 days

ShareOnAll (http://www.shareonall.com)

Account Registration: Yes (optional)

Upload Methods: Multi Local, Single Remote, Software

Free hosts supported: rapidshare.com, megaupload.com, filefactory.com, depositfiles.com, easy-share.com, zshare.net

Note: maximum 4 free hosts.

FTP2Share (http://www.ftp2share.com)

Account Registration: Yes (required)

Upload Methods: Single Local, Single Remote, FTP

Free hosts supported: rapidshare.com, depositfiles.com, megaupload.com, filefactory.com

Note: support premium and collector accounts.

MassMirror (http://www.massmirror.com)

Account Registration: No

Upload Methods: Single Local, Single Remote, Software

Free hosts supported: badongo.com, fastuploading.com, megaupload.com, rapidshare.com, zshare.net

Note: support upload form to use on blog, website.

Xirror (http://www.xirror.com)

Account Registration: Yes (optional)

Upload Methods: Single Local, Single Remote, Software

Free hosts supported: rapidshare.com, uploaded.to, rapidshare.com, netload.in

Note: interface is not in English

YouMirror (http://youmirror.biz)

Account Registration: Yes (optional)

Upload Methods: Single Local, Multi Remote, Software

Free hosts supported: bluehost.to, sharebase.de, rapidshare.com, uploaded.to, archiv.to, gulli.com, datenklo.net, share-online.biz, load.to, megaupload.com, speedyshare.com, cocoshare.cc, simpleupload.net, netload.in

Note: maximum 5 free hosts, encryption supported.

mirrorIT (http://www.mirrorit.de)

Account Registration: Yes (optional)

Upload Methods: Single Local, Single Remote,

Free hosts supported: sharebase.de, rapidshare.com, megaupload.com, share-online.biz, filefactory.com, netload.in, simpleupload.net, datenklo.net, bluehost.to, load.to, sendspace.com, files.to, uploaded.to, cocoshare.cc, archiv.to

Note: maximum 3 free hosts.

Xlice (http://xlice.net)

Account Registration: Yes (optional)

Upload Methods: Single Local, Multi Remote, Software

Free hosts supported: bluehost.to, datenklo.net, fastshare.org, files.to, gulli.com, load.to, netload.in, rapidshare.com, sharebase.de, share-online.biz, simpleupload.net, uploaded.to, uploadstube.de

Note: interface is not in English, also paid account, maximum 4 free hosts.

NextSpread (http://nextspread.com, http://www.xlspread.com/)

Account Registration: Yes (optional)

Upload Methods: Multi Local, Multi Remote (for registered users), Software

Free hosts supported: rapidshare.com, meinupload.com, bluehost.to, uploaded.to, share-online.biz, simpleupload.net, netload.in

Note: interface is not in English, maximum 4 free hosts.

75d (http://www.75d.de)

Account Registration: Yes (optional)

Upload Methods: Multi Local, Multi Remote

Free hosts supported: rapidshare.com, netload.in, uploaded.to, datenklo.net, archiv.to, fastshare.org, bluehost.to, share-online.biz

Note: interface is not in English

FileSpreading (http://filespreading.com/)

Account Registration: Yes (optional)

Upload Methods: Single Local, Single Remote

Free hosts supported: rapidshare.com, boost.am, files.to, gulli.com, netload.in, rapidshare.com

Note: support upload form to use on blog, website

dr.ag (http://dr.ag/multiupload.aspx)

Account Registration: No

Upload Methods: Single Local, Single Remote

Free hosts supported: speedshare.org, mirrorit.de, future-dld.com, ultrashare.de, egoshare.com, load.to, 2xupload.de, uploading.com

Note: considered the founder of this technique, also provide other free services.

Tinyload (http://tinyload.com)

Account Registration: Yes (optional)

Upload Methods: Single Local, Single Remote (through API)

Free hosts supported: megaupload.com, mediafire.com, rapidshare.com, divshare.com, bestsharing.com, sendspace.com, uploading.com, filesend.net, easy-share.com, amazon s3

Note: not stable, couldn’t get to upload to all 10 mirrors or amazon s3

.

Afrid.com (http://www.afrid.com)

Account Registration: No

Upload Methods: Single Local

Free hosts supported: rapidshare.com, axifile.com, badongo.com, filesend.net, cocoshare.cc, depositfiles.com, mihd.net, sharing.ru, turboupload.com

Make ur Internet n Bandwidth Rapid - Rapid Speeds 100%

1.Increase bandwidth by tweaking QoS in Windows XP Pro

The following tweak applies only to Windows XP Professional edition.

The default system behavior is that all 100% bandwidth is available, however, if there is a running application that indicates to the OS it needs to send high priority/real time data, then as long as it has the socket open, Windows XP will restrict “best effort” traffic to 80% of the bandwidth so that high priority traffic can be accommodated. Basically, applications can make this request to the operating system for QoS support using the QoS application programming interfaces (APIs) in Windows and this only applies if a specific app is requesting QoS.

If you'd like to change how much bandwidth is reserved for QoS (the default is 20% of the total bandwidth), do the following:

1. Make sure you're logged in as "Administrator" (not just any account with admin privileges).
2. Navigate to START>Run and type: gpedit.msc
3. Navigate to Local Computer Policy > Administrative Templates > Network > QOS Packet Scheduler
4. In the right window, double-click the limit reservable bandwidth setting
5. On the setting tab, check the enabled setting.
6. Where it says "Bandwidth limit %", change it to read 0 (or whatever percentage you want to reserve for high priority QoS data)
7. Click OK, close gpedit.msc

Under START > My Computer > My Network Connections > View Network Connections, right-click on your connection and under Properties (where it lists your protocols), make sure QOS Packet Scheduler is enabled.



The tweak desribed below helps boost priority for DNS & hostname resolution in general. What this means is, it helps web pages load faster, and has negligible effect on downloads (not counting the couple of ms gain with the host resolution at connect-time).

Applying this tweak assumes some proficiency in editing the Windows Registry using Regedit (Start > Run > type: regedit). As always, backup your Registry before making any changes so you can revert to the previous state if you don't like the results.


2.Host Resolution Priority Tweak
host name resolution priority
Windows 2k/XP

First, open the Windows Registry using Regedit, and (after backing up) navigate to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\ServiceProvider



Note the following lines (all hex dwords):
Class = 008 (8) - indicates that TCP/IP is a name service provider, don't change.

LocalPriority = 1f3 (499) - local names cache
HostsPriority = 1f4 (500) - the HOSTS file
DnsPriority = 7d0 (2000) - DNS
NetbtPriority = 7d1 (2001) - NetBT name-resolution, including WINS

What we're aiming to do is increase the priority of the last 4 settings, while keeping their order. The valid range is from -32768 to +32767 and lower numbers mean higher priority compared to other services. What we're aiming at is lower numbers without going to extremes, something like what's shown below should work well:

Change the "Priority" lines to:
LocalPriority = 005 (5) - local names cache
HostsPriority = 006 (6) - the HOSTS file
DnsPriority = 007 (7) - DNS
NetbtPriority = 008 (8) - NetBT name-resolution, including WINS

Windows 9x/ME

The tweak is essentialy the same as in Windows 2000/XP, just the location in the Registry is slightly different. For a more detailed description see the Windows 2000/XP section above.

Open the Windows Registry using Regedit, and (after backing up) navigate to:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\VxD\MSTCP\ServiceProvider

You should see the following settings:
Class=hex:08,00,00,00

LocalPriority=hex:f3,01,00,00
HostsPriority=hex:f4,01,00,00
DnsPriority=hex:d0,07,00,00
NetbtPriority=hex:d1,07,00,00

The "priority" lines should be changed to:
LocalPriority=hex:05,00,00,00
HostsPriority=hex:06,00,00,00
DnsPriority=hex:07,00,00,00
NetbtPriority=hex:08,00,00,00

Reboot for changes to take effect.


In addition to the tweaks already covered in Win 2k/XP Registry Tweaks and More Win 2k/XP Tweaks, the Windows XP Service Pack 2 introduces a few new issues covered in the article below. Please make sure you understand what you are doing before making any changes to your Operating System. Note the information below only applies to Windows XP Service Pack 2.



3.Remove the limit on TCP connection attempts

Windws XP SP2 introduces a few new twists to TCP/IP in order to babysit users and "reduce the threat" of worms spreading fast without control. In one such attempt, the devs seem to have limited the number of possible TCP connection attempts per second to 10 (from unlimited in SP1). This argumentative feature can possibly affect server and P2P programs that need to open many outbound connections at the same time.

Rant: The forward thinking of Microsoft developers here is that you can only infect 10 new systems per second via TCP/IP ?!?... If you also consider that each of those infected computers will infect 10 others at the same rate:
second 1: 1+10 computers
second 2: 10+10*10 computers (110 new ones)
second 3: 10+100*10 computers ( 1110 new ones)
second 4: 10+1000*10 computers (11110 new ones)
....
all the way to 10*60 + 10^60 computers in a single minute (that's a number with 60 digits, or it would far exceed Earth's population). Even if we consider that 90% of those computers are unreachable/protected, one would still reach ALL of them within a minute.

In other words, even though it is not going to stop worm spreading, it's going to delay it a few seconds, limit possible network congestion a bit, and limit the use of your PC to 10 connection attempts per second in the process ! I have no problem with the new default setting limiting outbound connection attempts. Still, users should have the option to easily disable or change this setting. I might be going out on a limb here, but ever since the introduction of Windows XP I can't help thinking that I dislike all the bult-in Windows "wisardry" in a sense that the system also limits user access. That irritating trend to ease the mental load on end users is somewhat insulting, considering that Windows is to make the more "intelligent" choice instead of the end user, as well as limit their access to tuning such settings...
End of rant.

With the new implementation, if a P2P or some other network program attempts to connect to 100 sites at once, it would only be able to connect to 10 per second, so it would take it 10 seconds to reach all 100. In addition, even though the setting was registry editable in XP SP1, it is now only possible to edit by changing it directly in the system file tcpip.sys. To make matters worse, that file is in use, so you also need to be in Safe mode in order to edit it.

You only need to worry about the number of connection attempts per second if you have noticed a slowdown in network programs requiring a number of connections opened at once. You can check if you're hitting this limit from the Event Viewer, under System - look for TCP/IP Warnings saying: "TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts". Keep in mind this is a cap only on incomplete outbound connect attempts per second, not total connections. Still, running servers and P2P programs can definitely be affected by this new limitation. Use the fix as you see fit.

To change or remove the limit, you can use the following program:

Event ID 4226 Patcher v2.11

Code:

http://www.speedguide.net/files/xp_sp2/EvID4226Patch211a-en.zip

1 anonymized URLs - Anonymity.com (this is auto-generated)
http://www.speedguide.net/files/xp_sp2/EvID4226Patch211a-en.zip

- A patching program for removing or changing the limit imposed on connection attempts in SP2. The patcher has the ability to restore tcpip.sys back to the original... Still, you might want to back up tcpip.sys, use it at your own risk. The author of this patch can be reached @ http://www.lvllord.de/

4. Recommended settings for Windows 2000 / XP
Windows 2000 & XP, unlike NT supports large windows as described in RFC1323 ( the 'RcvWindow' has a maximum value of 2**30 rather than 64K), and includes some other improvements over its predecessors you can use to speed up any TCP/IP transfers. , the descriptions and other options are added to provide you with better understanding and enable you to customize your settings.

All the following entries, unless otherwise noted should be placed in the Windows 2000/XP Registry under the key

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters

TCPWindowSize

The value of TCP Window in the Windows 2000 Registry is DWORD, representing number of bytes, with range from 0 to 2^30. The recommended values (in red) optimize TCP for any high speed Internet connection and work best in most cases, however if you'd like to use a custom value follow these guidelines:

For best results, the TCPWindow should be a multiple of MSS (Maximum Segment Size). MSS is generally MTU - 40, where MTU (Maximum Transmission Unit) is the largest packet size that can be transmitted. MTU is usually 1500 (1492 for PPPoE connections). To determine the MTU value of your ISP, check out the Advanced Registry Editing section of our site.

There are three places in the Windows 2000 Registry where you can add the TCP Window parameter.

HKLM/SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
GlobalMaxTcpWindowSize="256960" (DWORD, number of bytes) Valid range is from MSS to 2^30. Add the value as a decimal. Note: For best results RWIN has to be a multiple of MSS lower than 65535 times a scale factor that's a power of 2, i.e. 44 x 1460 = 64240 x 2^2 = 256960. If you choose to use a RWIN lower than 65535, you can simply make it multiple of MSS and turn scaling off (Tcp1323Opts=0)

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Param eters
TcpWindowSize="256960" (DWORD, number of bytes) Valid range is from MSS to 2^30. Add the value as a decimal. TcpWindowSize can also exist under TcpipParametersInterface - if added at this location, it overrides the global setting for this particular . Note (10/20/00): Seems MS has found another bug in Windows 2000, the TCPWindowSize should be configured with the global setting (GlobalMaxTcpWindowsSize) rather than this one - Q263088

Note: For best results RWIN has to be a multiple of MSS lower than 65535 times a scale factor that's a power of 2, i.e. 44 x 1460 = 64240 x 2^2 = 256960. If you choose to use a RWIN lower than 65535, you can simply make it multiple of MSS and turn scaling off (Tcp1323Opts=0)

Tcp1323Opts

Tcp1323Opts is a necessary setting in order to enable Large TCPWindow support as described in RFC 1323. Without this parameter, the TCPWindow is limited to 64K.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Param eters
Tcp1323Opts="1" (DWORD, recommended setting is 1. The possible settings are 0 - Disable RFC 1323 options, 1 - Window scaling but no Timestamp options, 3 - Window scaling and Time stamp options.)

Note: Tcp1323Opts="3" might help in some cases where there is increased packet loss, however generally you'll achieve better throughput with Tcp1323Opts="1", since Timestamps add 12 bytes to the header of each packet.

DefaultTTL

DefaultTTL determines the time in seconds and the number of hops a packet lives. While it does not directly affect speed, a larger value increases the amount of time it takes for a packet to be considered lost, discarded and retransmitted. A value that's too small can cause packets to be unable to reach distant servers at all.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Param eters
DefaultTTL="64" (DWORD, recommended setting is 64. Other settings that are widely used are 128 and 32)

EnablePMTUDiscovery

When set to 1 (True), TCP attempts to discover MTU automatically over the path to a remote host. Setting this parameter to 0 causes MTU to default to 576 which reduces overall performance over high speed connections. Note that this setting is different than our Windows 9x recommendation.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Param eters
EnablePMTUDiscovery="1" (DWORD - boolean, valid settings are 0-->False and 1-->True. Many connections perform better with this entry at 1, however, if you prefer to set your upstream to send fixed 1500 packets, you might want to use 0 instead). When set at 1, establishing connections and initial transfer speed might slow down a bit, however you will get better throughput if somewhere in the path large packets need to be fragmented.

EnablePMTUBHDetect

Setting this parameter to 1 (True) enables "black hole" routers to be detected, however it also increases the maximum number of retransmissions for a given segment. In most cases you'd want to keep BHDetect to 0 (False).

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Param eters
EnablePMTUBHDetect="0" (DWORD - boolean, valid settings are 0-->False and 1-->True. Recommended setting is 0)

SackOpts

This parameter controls whether or not SACK (Selective Acknowledgement) support is enabled, as specified in RFC 2018. SACK is especially important for connections using large TCP Window sizes.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Param eters
SackOpts="1" (DWORD - boolean, recommended setting is 1. Possible settings are 0 - No Sack options or 1 - Sack Option enabled).

TcpMaxDupAcks

This parameter determines the number of duplicate ACKs that must be received for the same sequence number of sent data before "fast retransmit" is triggered to resend the segment that has been dropped in transit.

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Param eters
TcpMaxDupAcks="2" (DWORD - range 1-3, recommended setting is 2).


Patches


This Includes

1. sguide_tweak_2k.zip
Description: Generic patch for Windows XP and Windows 2000 (all versions). This patch will optimize your TCP/IP Registry settings for high speed Internet connections. To install, extract the .inf file first, then double-click (or right-click on filename and choose install from the pull-down menu) and reboot for changes to take effect.

Code:

http://www.speedguide.net/files/sguide_tweak_2k.zip

1 anonymized URLs - Anonymity.com (this is auto-generated)
http://www.speedguide.net/files/sguide_tweak_2k.zip

2.sguide_tweak_2k_pppoe.zip

Description: Generic patch for Windows XP/2000 and DSL connections using PPPoE. This patch will optimize your TCP/IP Registry settings for high speed Internet connections. It is specifically designed for PPPoE DSL connections. To install, extract the .inf file first, then double-click (or right-click on filename and choose install from the pull-down menu) and reboot for changes to take effect.

Code:

http://www.speedguide.net/files/sguide_tweak_2k_pppoe.zip

1 anonymized URLs - Anonymity.com (this is auto-generated)
http://www.speedguide.net/files/sguide_tweak_2k_pppoe.zip

3. winxp_dnscache.zip

Description: Patch Windows 2k/XP not to cache failed DNS entries. By default, when a DNS lookup fails (due to temporary DNS problems), Windows still caches the unsuccessful DNS query, and in turn fails to connect to a host regardless of the fact that the DNS server might be able to handle your lookup seconds later. This patch fixes the problem by configuring the DNS client to continue sending queries to an unresponsive network. To install, save to your HD, unzip the .reg file, then double-click the filename.

Web Patches - faster loading of Web Pages

The following patch increases Web page loading speed, by doubling the number of possible concurrent open connections. For example, imagine a web page has 20 images and some text - in order for your browser to get all these files, it opens 2 or 4 concurrent connections, depending on the Web server. Increasing the number of open connections allows for faster retrieving of the data. Please note that the patch sets some values outside of the HTML specs. If you decide to install it, backup your Registry first. Changes will take effect after you reboot. Download the patch appropriate for your OS:

OS: Windows 9x/ME

Code:

http://www.speedguide.net/files/sg_webtweak_9x.zip

1 anonymized URLs - Anonymity.com (this is auto-generated)
http://www.speedguide.net/files/sg_webtweak_9x.zip

OS: Windows 2K/XP/2k3

Code:

http://www.speedguide.net/files/sg_webtweak_2k.zip

1 anonymized URLs - Anonymity.com (this is auto-generated)
http://www.speedguide.net/files/sg_webtweak_2k.zip

TCP OPTIMISER



Description: The TCP Optimizer is a free, easy Windows program that provides an intuitive interface for tuning and optimizing your Internet connection. Just download and run, there is no installaion required. The program makes it easy to find the best MTU and RWIN values, test latency and tweak all the important broadband related registry parameters. The Optimizer can be helpful with tuning any Internet connection type, from dialup to Gigabit+

Code:

URL http://www.speedguide.net/files/TCPOptimizer.exe

1 anonymized URLs - Anonymity.com (this is auto-generated)
http://www.speedguide.net/files/TCPOptimizer.exe

ENJOY !!!!!!!!!!

>>>>mobile Unlock Cheat<<<<

Nokia

Code:

*#06# IMEI (International Mobile Equipment Identity) information
*#0000# 1st Line: software version. 2nd line: date of software release. 3rd line: phone type
*#746025625# Checks if the SIM clock can be stopped. It is a kind of standby mode that will save battery. However,

the clock automatically gets activated when the phone is switched off and on
*#92702689# Here is a big one! A menu will come up with six choices. First, it’ll display the serial number. Second,

the month and year of manufacture. Third, the date of purchase. Fourth, the last repair date. Fifth, the option to

transfer user data if you have the hardware for it. Sixth, the number of hours the phone has been on. Some of these

dates might not be displayed if the information doesn’t exist
*3370# Enhanced Full Rate (EFR) codec activation
#3370# EFR codec deactivation
*4370# Half Rate codec activation
#4730# Half Rate codec deactivation

EFR gives better voice quality compared to the half rate codec, but can cut down on the battery life. Your phone

will automatically restart after you feed in any of the above codecs

xx# Here is a harmless little one. This will automatically display the number at the ‘xx’ position in your phone book

Motorola

Code:

*#06# Displays IMEI
[][][] 119 [] 1 [] OK Enable EFR
[][][] 119 [] 0 [] OK Disable EFR

Samsung SGH-2100/600

Code:

*#06# Displays IMEI
*#9999# Software version
*#0324# Technical menu
*#0523# Lets you adjust the screen contrast
*#0228# Battery status (capacity, voltage, temperature

How to Work with the Registry

I take no responsibility in what you do.

Working with the registry can be dangerous even if you know what you are doing. Making a wrong change can cause problems severe enough that they cannot be solved short of a reinstall. Just be carefull and try to know what changes are actually being made before doing them.

This tutorial explains how to work with the Windows XP registry. It will show you how to navigate it using Windows registry editor. It will explain how to export and import registry files, how to change existing values, how to add new values and keys, and finally how to write registry files.


Opening the registry editor

This is step number one, just opening the editor to view the registry.
This is easy, just click on the start button and then on run. Once run is open, type in regedit and click OK.




Navigating the registry

Once you have regedit open, it is fairly easy to get where you want to.

Now you see the "folders" HKEY_CLASSES_ROOT, HKEY_CURRENT_USER, HKEY_LOCAL_MACHINE, HKEY_USERS, and HKEY_CURRENT_CONFIG

First lets get some basic terminology down: These five main "folders" are calles hives, and their subfolders are called keys. Click on the + next to HKEY_CURRENT_USER to expand the hive.



Now if you wanted to open HKEY_CURRENT_USER\Software\Microsoft, click the + next to Software, then the + next to Microsoft.



This is how you can get to any place within the registry.


Exporting registry keys

This should be done to any and all registry keys before changing them.

It will give you an easy way of changing back any changes that you make editing the registry.

Right click the key that you want to export, and select Export.



Then give it a name so you remember what it is. I use the name of the key as an example.




Importing registry files

Now that you have exported keys to change back your changes, you need to know how to import them into the registry.

Usually a double-click on a registry file will merge it for you unless you have changed the default action.

Then you have to right-click the file and select Merge.





Changing exising values

You now know how to navigate to different keys in the registry and how to back
up these keys before you make changes to them.

Logically next you need to know how to make these changes.

There are three main types of registry values that you will deal with: STRINGS, DWORDS, and BINARY values. There are others, but these are 99% of what you will deal with doing normal editing.

To change an existing STRING value, just double click it and enter in the new value data.



To change an existing DWORD value you have two options, hexadecimal and decimal. Be sure you know what type the value should be, 200 hexadecimal is 256 decimal, c8 is hexadecimal for 200 decimal, for example.



To change binary values it is a little more complicated because they are written in hex. The applicable values are entered in 2's and have the format 00 01 02 - 0F - FF and each have a different value associated with them.

This picture may make it a little more clear.



Having to change a binary value from something other than 01 to 00 or 00 to 01 is pretty rare.


Adding new values

Adding values is very similar to changing them with the exception that you have to name the value.

Right click in the left-hand-side of the registry editor and select New > String (or whatever value type you want to add)



and then name it what you need.



Then you change its value by doing the same method as if it was an existing value.


Adding new keys

Along with adding values, this is most helpful if you are trying to add group policy values through the registry. Most of the keys that are needed for them are not there by default.

So, you need to add a key under HKEY_CURRENT_USER\Software\Policies\Microsoft, how?

Easily, just right-click on HKEY_CURRENT_USER\Software\Policies\Microsoft in the folder tree, and then New > Key



Now you need to change the name of the key to the desired name.





Deleting keys and values

The first thing that must be realized when deleting keys or values is that there is no Recycle Bin for the registry, once its gone its gone. To delete keys or values, just right-click them and select delete. Also keep in mind that deleting a key also deletes all subkeys of that key.







Writing registry files

Now you can automate the manual entry and deletion of registry values and keys with .reg files. Use notepad or wordpad to write registry files, you just save them with a .reg extension.

The first line in the registry file for XP or 2000 has to be:

Code:

Windows Registry Editor Version 5.00

NOTE: For windows 98, ME, NT 4.0 replace with:

Code:

REGEDIT4

Put a line in between Windows Registry Editor 5.00 and the next entry. Now you have to declare the key that you want to change values in by writing it in brackets.

This will also create the key if the one declared doesn't exist:

Code:

[HKEY_CURRENT_USER\Key\Subkey]

Now the next line will either create the string "String 1" equal to "Value 1" if "String 1" doesn't exist, or change the value of the string "String 1" to "Value 1" if it does:

"String 1"="Value 1"

The (default) value is a string and you use the "at" symbol for this.

@="Default 1"

To change or create dword values, you must know the value in hexadecimal, for that is how they are written.
The next line will create the dword "Dword 1" equal to a decimal 20, by setting it equal to dword:00000014, or if "Dword 1" already exists, it will change it's value to a decimal 20. Just remember dword:00000010 is actually decimal 16, dword:0000000a is decimal 10

"Dword 1"=dword:00000014

Now binary values. This line will create or change a binary value "Binary 1" equal to 01 AA 05 55.

"Binary 1"=hex:01,AA,05,55

So this is the reg file to add a string, default, dword, and binary value to HKEY_CURRENT_USER\Key\Subkey:

Code:

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Key\Subkey]
"String 1"="Value 1"
@="Default 1"
"Dword 1"=dword:00000014
"Binary 1"=hex:01,AA,05,55

Now how to delete values or keys with regfiles.

If you want to delete a key just put a minus sign in front of it in the file:

Code:

[-HKEY_CURRENT_USER\Key\Subkey]

If you want to delete a value, it doesn't matter what kind, set the value equal to a minus.

"String 1"=-

@=-

"Dword 1"=-

"Binary 1"=-

So if you wanted to add a dword "Dword 1" that equals 1, and delete the value "String 1" in HKEY_CURRENT_USER\Key\Subkey1 and delete the HKEY_CURRENT_USER\Key\Subkey2, the file would look like:

Code:

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Key\Subkey1]
"Dword 1"=dword:00000001
"String 1"=-

[-HKEY_CURRENT_USER\Key\Subkey2]

The final thing to learn is how to comment the files, add a semiclon in front of any line and it will be ignored:

Code:

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Key\Subkey1]
;This changes the dword to equal 1
"Dword 1"=dword:00000001
;This deletes the string value
"String 1"=-

;This deletes the key Subkey2
[-HKEY_CURRENT_USER\Key\Subkey2]

How to Make Partitions Successfully!

What you need:

One PC with a hardrive...
Paragon Partition Manager...
20 Minutes of your time...

If you don't have Paragon Partition Manager download it here:

Code:

http://rapidshare.com/files/87681672/Paragon.Partition.Manager.v9.0.Professional.Retail-FOSI.rar

1 anonymized URLs - Anonymity.com (this is auto-generated)
http://rapidshare.com/files/87681672/Paragon.Partition.Manager.v9.0.Professional.Retail-FOSI.rar

Install that and open it...

Lets get started...

Step 1



Step 2



Step 3



Step 4



Step 5



Step 6

On this step, If it restarts your PC it is perfectly OK!



Step 7



Step 8



Step 9



That is it, You have made a new partition of your hadrive!

Look at this...

Before



After

__________________

How to preview movies from Multi part .RAR Archives

If you have downloaded movies, in RAR Archives that have been split up into more than one parts using a Winrar you will know how frustrating it can be coz the movie may be one you already own or it may even be the wrong one. And to preview it you need to download all the parts.

Heres a method to preview the movie by downloading only the first part.

To preview .mpg .wmv .avi .mp3 files -
Things you need -
1. Winrar Archiver
2. Password for the RAR Archive, if it is password protected
3. A Media Player like Winamp, WMP..............

How to do it -
Lets assume that you want to preview a movie that has been converted into 7 RAR Archives named - claudia_ferrari_shq.part1.rar, claudia_ferrari_shq.part2.rar, .............., claudia_ferrari_shq.part7.rar.

And lets say you have downloaded claudia_ferrari_shq.part1.rar and want to preview the move inside it. (Note for this to work you must download the first part. It doesnt matter if you download any number of parts as long as they are in order, ie. dont download the last part first).

Now open the first part with Winrar. And click on Extract To button.



Now comes the important part DON'T FORGET TO CHECK THE Keep broken files BOX AS SHOWN IN PICTURE -



You can either enter a custom address to save the clip in or you can continue with the default address, like I did. Click Extract. If the file is password protected you will be prompted to enter the password, in this case enter the password and click ok. If you downloaded more than one archive (in this case I have downloaded 3 parts - claudia_ferrari_shq.part1.rar, claudia_ferrari_shq.part2.rar, claudia_ferrari_shq.part3.rar) you will get the following message -



Click Process All files in all volumes from the current, to extract files from all the downloaded parts. After this you will be able to see the extraction screen -

After the files from the parts have been ectracted you will prompted to give the path for the next part.




Now click Cancel. On doing this an error window will pop-up.



Click Close.

Now go to the pathname which you initially gave, while extracting the file.



And voila you will have the preview. Play this file with your default Media Player.
Sometimes while trying to preview .avi files you may get an error. You can remedy this by playing it in some other player like, Power DVD XP or I strictly recommend vlc player to watch the movie!!! (of course, only the downloaded part will be watchable.

Code:

http://www.videolan.org/vlc/

1 anonymized URLs - Anonymity.com (this is auto-generated)
http://www.videolan.org/vlc/

2. To extract Bin-Cue files -

Things you need -
1. Winrar Archiver
2. VCD Gear
3. A Media Player

How to do it -
Follow the procedure for extraction, as given above.

Now in the new folder that has been created there will be two files -
1. A .bin file
2. A .cue file
Now open VCD Gear, and in the Window click LOAD and then give the pathname of the .cue file.
On doing so, it will ask for a file name. You can either save it with default name or give your own name. Click OK
After the process finishes, go to the folder containing the .cue file. There will be a .mpg file in that folder now. Play the .mpg file and this will be the preview of the movie you are downloading.

How To Use Hide Ip platinum v3.5 In Mozilla Firefox

Step 1 Download Hide Ip Platinum v3.5 + Keygen From Here

Code:

http://rapidshare.com/files/115886008/Hide_ip_Platinum_3.5___keygen.rar

1 anonymized URLs - Anonymity.com (this is auto-generated)
http://rapidshare.com/files/115886008/Hide_ip_Platinum_3.5___keygen.rar

Step 2 Install The Software.

Step 3 After Installing The Software Open Internet Explorer

Step 4 Click tools/internet Options/Connections/Lan Settings/

Step 5 Copy The Proxy And Port

Step 6 Open up Mozzila Firefox Click tools/options/Advanced/Settings/Manual Proxy Configuration And Paste Proxy And Port

Enjoy Using Hide ip Platinum v3.5 In Mozzila Firefox !

How to access Bios setup on most all computers

How to Access BIOS Setup on Most All Computers

You might want to file this in case you run into a garage sale.........

This is most likely because the particular sequence to enter your systems BIOS
is not by pressing the Del key. There are several key combinations that work and
each system uses their own. When you first power up your computer, view the POST
(Power On Self Test) messages. Typically the message prompting you to enter the
BIOS setup will be displayed soon after the memory check is completed. Within
this message the proper key sequence will be displayed. If you own an HP, Dell,
Gateway or other manufacturer, a "splash" screen may be present that hides the
POST messages. You can bypass this by pressing the Esc or Tab keys to view the
POST messages.

Acer: - Ctrl+Alt+Esc

ALR PC: (F2) or (Ctrl)(Alt)Esc)

AMI BIOS: (Del), (F1) or (F2)

AST, Advantage, Award, Tandon: - Ctrl + Alt + Esc

Award BIOS: (Del) or (Ctrl)(Alt)(Esc)

Compaq: (F10) (do this when the cursor is in the upper right corner of the
screen blinking)

Dell: - F1 or Del.

Dell: - Some require pressing reset twice

Dell: - Ctrl + Alt + Enter

DTK BIOS: (Esc)

Gateway 2000: - F1

Hewlett Packard: - F1

IBM:


Older Models - In order to get into the configuration of the IBM setup screen
(CMOS) screen you need to hold down both mouse buttons during bootup.

Aptiva - Press F1

IBM PS/2: (Ctrl)(Alt)(Ins) after (Ctrl)(Alt)(Del)

IBM PS/2 with reference partition: - Press Ins during boot

Some PS/2s, such as 75 and 90: - Ctrl Alt ?

Some PS/2s when pointer at top right of screen: - Ctrl + Ins

Leading Edge:


Fortiva 5000 -

NEC: - F2

Packard Bell: - F1 or F2

Phoenix BIOS: (F1), (F2), or (Ctrl)(Alt)(Esc)

Phoenix BIOS: - Ctrl Alt S

Phoenix BIOS: - Ctrl S

Phoenix BIOS: - Ctrl Alt Ins

Sharp Laptop 9020: - F2

Sony: (F3) while you are starting the PC, then (F2) or (F1)

Tandon computers: - Hold down the key after turning on power

Tandon: - Ctrl + Shift + Esc

Toshiba Laptops: - Toshiba Utility

Toshiba: - Press Esc during boot

Toshiba, Phoenix, late model PS/1 Value Point and 330s: - Press F1 during boot

Olivetti PC Pro: - Shift Ctrl Alt + Num Pad Del

Miscellaneous PC's: - Ctrl + Esc or Ctrl and Alt and +

Zenith: - Ctrl Alt Ins

How to burn in subtitles into AVI files

Burning subtitles to an AVI file

Software:

Quote:

Virtual Dub VobSub DivX or Xvid codec

If you need to convert/adjust/join up your subtitles, then use Subtitle Workshop (FREEWARE) before taking these steps!!


Once you have the software, you need to install VobSub (Virtual Dub just extracts to a folder)



Load up your video file using Virtual Dub and add the TEXTSUB filter





Locate your subtitle file



Now back to the main window and now we need to recode the video ( FULL PROCESSING MODE )



I've used DivX in this instance, but you can use any codec ie Xvid








Back to the main window and we need to ensure that the audio remains in the same format ( DIRECT STREAM COPY )




Now we can save the new video file with a NEW name

How to burn PS2 games, and play them on your PS2

Welcome, to the guide that will tell you how to burn PS2 games, and play them on your PS2 without a modchip! Modchips are hard to find, cost a lot, and require soldering experience to install. This method is cheap, and requires no experience at all. Lets go on to the Guide.



Downloading the games

This part is actually the easiest. Go to google, and find yourself a copy of utorrent. Once you have downloaded and installed, open it up. A speed guide will appear. Make sure the port is forwarded, and if it is, choose your connection speed, and press OK. Click file, and then exit. Now you will go to google and find the game you want. If you purchased your console in the USA, look for a game that says NTSC on it. Live anywhere else, and pick up a copy of your game in PAL. This is VERY important, as switching the modes will make the screen colorless, or sometimes blank. After your game has downloaded (2 hours – 2-3 days) go to the next step.



Extracting the game

If you find your game is in RAR, ZIP, or a series of numbers, then you need this next stop. If your game is in ISO, BIN, or MDF/MDS, skip to burning. To extract your game, get the program WinRAR. The program says it’s a trial, but nothing happens when your trial runs out. Move the ISO, BIN, or MDF/MDS file to the desktop, and close WinRAR. Go on to the next step.



Burning your game

We are going to use Alcohol 120%, a burning application. I would suggest getting a torrent of this application. Once you have installed the application, I suggest restarting your computer. Click on Image Burning Wizard, which is located on the left side of Alcohol. Choose your ISO, and press next. At the bottom of the next window is a dropdown menu. Choose Playstation 2, and then change the Disc speed to lowest. If you forgot to put your burnable DVD in the tray before this, please do so, and restart Alcohol. Choose the slowest burn speed possible. Leave the rest settings alone, and then press next. The disc is now being burned. I HIGHLY suggest that you don’t do anything during the burning process, as you may lose buffer, which is critical for DVD’s. Once its done, go to the next step.



Playing the game

All you need is a codebreaker, a REAL PS2 DVD (DVD games are silver on the bottom. CD games are blue) , and a USB pen drive.
Download this file

http://rapidshare.com/files/113128934/Code.Breaker.zip




Put all of the files in this ZIP file into your USB drive. Insert your codebreaker in the PS2 WITHOUT THE USB DRIVE INSERTED. Once its booted, go to device management, and insert your USB. Click the USB option, and choose to save the file to the memory card. Once its done, turn off the PS2. Go here

Download cogswap

http://rapidshare.com/files/113129807/COGSWAP.rar


unzip it, and insert the ELF file onto your USB drive. Put your USB drive into the PS2, and turn on codebreaker. After the load screen is up for a little bit, you should see SMS player. Press start, and go to browser settings. Choose exit to: MC0 system something then boot.elf. Save the changes, and exit SMS browser. You are now met with a white screen. Press select, scroll to the start button, press O on your controller, and navigate to MASS: cogswap.elf. Press OK using the O key, and press start to load cogswap. If all went well, you should now press eject, and remove the the front part of the tray. This thing snaps on and off, so keep it to make it look beautiful after the process. Insert that REAL PS2 game you actually bought. When the CD on the screen turns yellow, use a butter knife. Insert it in the middle of the tray, at the bottom. Slowly move the knife right, and you will see the tray open slightly. You can now pull the tray out with your fingers. Take out the disc, and replace it with the burned game from before. Close the tray a little fast, but not shoving. Take the Knife, take it as fir right as possible, and push left. If you feel something following the knife, your doing it right. Once the knife will go no further, press X. It will now tell you to use cogswap. Ignore this, and press X again, and MAGICAL! The game is now loading.

How Getting Your Rapidshare account If Scammed

After shef and I recovered our collector account, we felt its important to let everyone else to know how to recover their precious RS accounts (whether premium or free accounts) if lost to scammers, and show those ~censored~s out there that they can go screw themselves.




The most important thing is an exact copy of the error-message and your account-details.

Name*: ...
E-Mail*: ...
Login-ID*: ...
Transaction-ID*: ...
Date of account-creation: ...
Date of payment**: ...

* This has to be the details you used when you paid for your account. You can find your transaction-ID in your Paypal account.
** If you used an eCheck.



support@rapidshare.com


Here is provided for Rapidshare Technical Support to get our accounts back:

1. Account name: Login ID and the aliases you've used
2. Date of creation
3. Date of thievery
4. A copy of the LOGS (where the IPs are recorded) and tell RS which ones are friendly and get them to blacklist the hostile ones (which are most likely ones belonged to the scammer)
5. Email used to create the account
6. All emails that have been applied to the account
7. Make a backup of all the links of the files uploaded to the account (use that extract link option)



IMPORTANT -

Rapidshare asked us to give them a few links of uploaded content, I think they use them to track the account so its vital for you to have a clear record of what have been uploaded to your account and what their links are.

8. Tell them the Number of files uploaded and the Total Size of the files uploaded. Simply copy paste the account status on your main menu.
9. Tell them how many points you have got.
10. Take screenshots of Your Main Menu, Your LOGS, Your OPTIONS


Tips:

- Make sure your email is sincere. formal and honest. Don't be aggressive, they reply really fast and they are nice people.
- Tell them a good reason why your account MUST be recovered. Shef and I said our account contained confidential and very personal information that are very important to our family etc..

Get higher Google pagerank by naming files and/or blog post titles optimally!

While naming your files or blog posts titles…

First lets talk about optimal filenames:

• Never use filenames like ch1, ch2, … or 1, 2, 3, etc…
• If you want hierarchy go for ch1-Intro, ch2-Types, etc…
• Try to use longer filenames with as much keyword as possible.
• If file is static HTML file then always make use of title tag :